This GameCube Is Now A Switch Dock — With Working Controller Ports

This GameCube Is Now A Switch Dock — With Working Controller Ports

I love my Switch, but you know what was also great? The GameCube. If only there were a way to combine the two… oh wait, there is! At least if you’re as clever as this DIY modder.

On his YouTube channel this week, Dorison Hugo took a replica Switch dock and put it inside an old silver GameCube to make one of the best Frankenstein Switch accessories ever. In addition to looking way cooler than the normal black dock, it also has functional GameCube controller ports.

It’s kind of like when they added that third nacelle to the Enterprise D in the series finale of Star Trek: The Next Generation.

Here’s how he did it.

This GameCube Is Now A Switch Dock — With Working Controller Ports

First he made a 3D model of the official Switch dock. The point of this was to make a dock that was customised to fit better inside the Gamecube but was still as close to the original measurements as possible.

This GameCube Is Now A Switch Dock — With Working Controller Ports

Then he 3D printed his own dock, tested it, and re-tuned his 3D model for the final version.

This GameCube Is Now A Switch Dock — With Working Controller Ports

Next he cut into the GameCube shell (after removing the guts). This is both the coolest and most harrowing part, because it involves needing to be precise with the use of a dremel buzzsaw. I mean, you want this thing to look nice after all.

This GameCube Is Now A Switch Dock — With Working Controller Ports

Then he hollowed out the case, glued in the switch dock, and reinstalled the electronics from his real Switch docck to make the 3D printed one work.

This GameCube Is Now A Switch Dock — With Working Controller Ports

Finally, and this is the part that makes this particular mod so special, he took apart a four-port GameCube controller adaptor built for the Wii U, connected the USB to the Switch dock, and secured it inside the front of the Gamecube shell so the controllers would be exactly where you’d normally see them.

As a result, he can now play Switch games, in docked mod, with one of the best controllers of all time.

This GameCube Is Now A Switch Dock — With Working Controller Ports

These, of course, are the abbreviated steps. Hugo was very methodical in trimming out excess plastic and gluing stuff inside the dock and Gamecube shell so everything fit nicely and wouldn’t move around. “Soldering would have made it all easy,” Hugo said in an email. “But using the original cables required some planning. Other than that the hard part was not scratching the case.”

It’s unclear whether the extra plastic on either side of the dock will create heating problems in the long term, but so far he says he hasn’t experienced any in his limited testing. While the project takes a lot of work and requires a lot of extra tools (not all of us have 3D printers lying around) this contraption sure would come in handy once the hits later this year.

You can everything that went into making the Gamecube Switch dock in more detail in Hugo’s video below.


The Cheapest NBN 1000 Plans

Looking to bump up your internet connection and save a few bucks? Here are the cheapest plans available.

At Kotaku, we independently select and write about stuff we love and think you'll like too. We have affiliate and advertising partnerships, which means we may collect a share of sales or other compensation from the links on this page. BTW – prices are accurate and items in stock at the time of posting.

Comments